BMC Parts Excellent Electrical Insulation, Good Flame Resistance, Good Corrosion Resistance, High Strength

We know that the motor as an important part of many devices, in the production of the time, the requirements of the parties are very strict. Therefore, there are many friends more curious, as a new material BMC Parts in many aspects of the outstanding performance, whether it can be applied to the motor? Here we are on this issue to analyze, hoping to help to everyone.

In general, in the production of the motor, we choose the material needs to meet these requirements at the same time: 1, with good heat dissipation; 2, good heat resistance; 3, with strong insulation properties. From this point of view to analyze the words, then the BMC Parts also has such a performance characteristics. In fact, when the traditional production of a lot of electronic equipment, will use a metal shell as a protection.

This will not only increase the complexity of the entire process, but also makes the weight of the product becomes relatively large. So in the course of the operation, it is likely that there will be greater noise. And even sometimes there will be poor insulation effect of the situation. Therefore, in the modern production of production, often choose to use BMC Parts, this is because the material also has good heat dissipation and thermal conductivity.

At the same time because the BMC Parts itself has a very good insulation, so in the production process, we do not need to add another metal shell for protection. It can be seen that the use of the material, can simplify the production process, but also can reduce the quality of the product.

In addition, BMC Parts also has a strong frequency, so during use, but also to avoid a lot of equipment during the rotation of the noise generated by the resonance point, but also can save a lot of production costs. For this reason, the application of BMC Partss is also more extensive.

BMC Parts use you know what is the main? Its performance and how? In recent years, BMC Partss have become more and more widely used. However, there are still a lot of friends for the understanding of the material is not much, today, we specifically for the use of the material and the main performance to introduce, hoping to deepen our understanding of this content.

BMC Parts to say the use, then the main can be attributed to the four major aspects. The first is that it can be used as an electrical component, including different categories, such as low pressure, high pressure and so on. The second application is used as auto parts, mainly car lights launchers, car ignition, separation discs, decorative panels and speakers, and so on. The third category is used as a motor part, such as air conditioning motor, motor shaft and coil skeleton. In addition can also be used in the production of daily necessities, such as electric iron bucket shell.

When used, in order to ensure the performance of BMC Partss, then we are in the packaging and transportation and storage, also need to pay attention to some problems. Usually, when we are in the packaging, it is now packaged in a composite film bag, usually 25 kg per pack, after dressing into the carton. In the transport process, should pay attention not to be under pressure, but also can not be heated.

During storage, not only to ensure that its packaging is intact, but also should be placed in the temperature suitable place to ensure that its storage environment temperature does not exceed 25 degrees Celsius, but also should be to avoid the direct sunlight to the place, but also Keep the BMC Parts dry.

So what about the performance of the BMC Parts? In fact, BMC Parts has a lot of excellent performance, such as the appearance of beautiful bright, good coloring, easy deformation, low shrinkage, finished product size is very stable, excellent electrical insulation, good flame resistance, corrosion resistance, high strength, Not easy weathering.